factory_test_tool/ExportForm.cs

using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.IO;
using System.Runtime.Serialization.Formatters.Binary;
using System.Text;
using System.Windows.Forms;
using System.Xml.Serialization;
using System.Text.RegularExpressions;
using System.Net;
using System.Reflection;
using NPOI;
using NPOI.SS.UserModel;
using NPOI.HSSF.UserModel;
using Spire.Xls;
using Workbook = Spire.Xls.Workbook;

namespace MOTINOVA_Motor_Factory_Set
{
    public partial class ExportForm : Form
    {
        //参数按照字典类型存储
        Dictionary<string, UInt16> Params1 = new Dictionary<string, UInt16>();
        Dictionary<string, UInt16> Params2 = new Dictionary<string, UInt16>();
        Dictionary<string, UInt16> MotorParam = new Dictionary<string, UInt16>();
        Dictionary<string, string> Otherinfo = new Dictionary<string, string>();
        Dictionary<string, UInt16> TestThData = new Dictionary<string, ushort>();
        Dictionary<string, string> MarkInfo = new Dictionary<string, string>();

        //文件路径
        public string FilePath = "";

        public ExportForm()
        {
            InitializeComponent();
        }

        private void ExportForm_Load(object sender, EventArgs e)
        {
            
        }

        private void SetDefault()
        {
            //参数1
            Params1.Clear();
            Params1.Add("启动模式", 2);
            Params1.Add("停机时间", 100);
            Params1.Add("限速值", 25);
            Params1.Add("下降速度", 3);
            Params1.Add("前飞", 14);
            Params1.Add("后飞", 9);
            Params1.Add("限流", 15);
            Params1.Add("温度预警", 95);
            Params1.Add("温度保护", 125);
            Params1.Add("码表", 0x55);//有，不支持无码表
            Params1.Add("轮胎周长", 219);//cm
            Params1.Add("系列号", 0);
            Params1.Add("ECO增益", 100);//放大100倍
            Params1.Add("ECO加速", 100);
            Params1.Add("NORM增益", 100);
            Params1.Add("NORM加速", 100);
            Params1.Add("SPORT增益", 100);
            Params1.Add("SPORT加速", 100);
            Params1.Add("TURBO增益", 100);
            Params1.Add("TURBO加速", 100);
            Params1.Add("SMART增益", 100);
            Params1.Add("SMART加速", 100);
            Params1.Add("车速级数", 1);
            Params1.Add("踏频启动", 2);
            Params1.Add("指拨模式", 0x55);
            Params1.Add("速度信号来源", 0x55);//传感器
            Params1.Add("周长微调", 0);
            Params1.Add("低压保护", 3000);//mV
            Params1.Add("推行限速", 60);//放大10倍
            Params1.Add("推行转速", 135);

            //参数2
            Params2.Clear();
            Params2.Add("姿态传感器", 0x55);//不支持
            Params2.Add("俯仰角零偏", 0);
            Params2.Add("横滚角零偏", 0);
            Params2.Add("尾灯模式", 2);
            Params2.Add("前灯电压", 12);
            Params2.Add("尾灯电压", 12);
            Params2.Add("报警阈值", 150);//放大10倍
            Params2.Add("尾灯脉宽", 70);
            Params2.Add("尾灯周期", 150);
            Params2.Add("起始限速", 0);            
            Params2.Add("结束限速", 0);

            //马达参数
            MotorParam.Clear();
            MotorParam.Add("额定功率", 250);
            MotorParam.Add("空载转速", 1200);
            MotorParam.Add("定子电阻", 10);
            MotorParam.Add("定子Lq", 10);
            MotorParam.Add("定子Ld", 10);
            MotorParam.Add("反电动势", 36000);
            MotorParam.Add("额定电压", 36);

            //其它信息
            Otherinfo.Clear();
            Otherinfo.Add("生产商", "TTIUM");
            Otherinfo.Add("生产地", "WUHAN");
            Otherinfo.Add("生产日期", DateTime.Now.ToString("yyyyMMdd"));
            Otherinfo.Add("校验密钥", "AVONITOM");
            Otherinfo.Add("信息1", "");
            Otherinfo.Add("信息2", "");
            Otherinfo.Add("信息3", "");

            //测试阈值
            TestThData.Clear();
            TestThData.Add("空载电流", 1000);
            TestThData.Add("车速", 150);
            TestThData.Add("指拨转速", 1225);
            TestThData.Add("零偏最小值", 100);
            TestThData.Add("零偏最大值", 1800);
            TestThData.Add("标定系数最小值", 25);
            TestThData.Add("标定系数最大值", 75);
            TestThData.Add("启动值最小值", 350);
            TestThData.Add("启动值最大值", 750);

            //其它测试备注信息
            MarkInfo.Clear();
            MarkInfo.Add("PCBA版号", "");
        }

        private void ParamsDisplayUpdate()
        {
            //参数1
            comboBox_StartMode.SelectedIndex = Params1["启动模式"] - 1;
            textBox_StopTime.Text = Params1["停机时间"].ToString();
            textBox_SpeedLimit.Text = Params1["限速值"].ToString();
            textBox_Dec.Text = Params1["下降速度"].ToString();
            textBox_T_Front.Text = Params1["前飞"].ToString();
            textBox_T_Tail.Text = Params1["后飞"].ToString();
            textBox_MaxCurrent.Text = Params1["限流"].ToString();
            textBox_NTC_Alarm.Text = Params1["温度预警"].ToString();
            textBox_NTC_Ptotect.Text = Params1["温度保护"].ToString();
            if (Params1["码表"] == 0x55)
            {
                comboBox_NoPBU.SelectedIndex = 1;
            }
            else if (Params1["码表"] == 0xAA)
            {
                comboBox_NoPBU.SelectedIndex = 0;
            }
            textBox_WheelSize.Text = Params1["轮胎周长"].ToString();
            textBox_Serial.Text = Params1["系列号"].ToString();
            textBox_ECO_Gain.Text = ((float)(Params1["ECO增益"]) / 100.0f).ToString("#0.00");
            textBox_ECO_Acc.Text = ((float)(Params1["ECO加速"]) / 100.0f).ToString("#0.00");
            textBox_NORM_Gain.Text = ((float)(Params1["NORM增益"]) / 100.0f).ToString("#0.00");
            textBox_NORM_Acc.Text = ((float)(Params1["NORM加速"]) / 100.0f).ToString("#0.00");
            textBox_SPORT_Gain.Text = ((float)(Params1["SPORT增益"]) / 100.0f).ToString("#0.00");
            textBox_SPORT_Acc.Text = ((float)(Params1["SPORT加速"]) / 100.0f).ToString("#0.00");
            textBox_TURBO_Gain.Text = ((float)(Params1["TURBO增益"]) / 100.0f).ToString("#0.00");
            textBox_TURBO_Acc.Text = ((float)(Params1["TURBO加速"]) / 100.0f).ToString("#0.00");
            textBox_SMART_Gain.Text = ((float)(Params1["SMART增益"]) / 100.0f).ToString("#0.00");
            textBox_SMART_Acc.Text = ((float)(Params1["SMART加速"]) / 100.0f).ToString("#0.00");
            textBox_SpeedSensor.Text = Params1["车速级数"].ToString();
            textBox_CadenceStart.Text = Params1["踏频启动"].ToString();
            if (Params1["指拨模式"] == 0x55)
            {
                comboBox_GasMode.SelectedIndex = 0;
            }
            else if (Params1["指拨模式"] == 0xAA)
            {
                comboBox_GasMode.SelectedIndex = 1;
            }
            if (Params1["速度信号来源"] == 0x55)
            {
                comboBox_SpeedSensor.SelectedIndex = 0;
            }
            else if (Params1["速度信号来源"] == 0xAA)
            {
                comboBox_SpeedSensor.SelectedIndex = 1;
            }
            else if (Params1["速度信号来源"] == 0xEE)
            {
                comboBox_SpeedSensor.SelectedIndex = 2;
            }
            textBox_WheelSizeAdj.Text = Params1["周长微调"].ToString();
            textBox_UV_Protect.Text = Params1["低压保护"].ToString();
            textBox_Walk_SpeedLimit.Text = ((float)(Params1["推行限速"]) / 10.0f).ToString("#0.0");
            textBox_WalkSpeed.Text = Params1["推行转速"].ToString();

            //参数2
            if (Params2["姿态传感器"] == 0x55)
            {
                comboBox_AstSensor.SelectedIndex = 0;
            }
            else if (Params1["姿态传感器"] == 0xAA)
            {
                comboBox_AstSensor.SelectedIndex = 1;
            }
            textBox_Angle_P.Text = ((float)(Params2["俯仰角零偏"]) / 10.0f).ToString("#0.0");
            textBox_Angle_R.Text = ((float)(Params2["横滚角零偏"]) / 10.0f).ToString("#0.0");
            comboBox_LightMode.SelectedIndex = Params2["尾灯模式"] - 1;
            if (Params2["前灯电压"] == 6)
            {
                comboBox_HeadLightVol.SelectedIndex = 0;
            }
            else if (Params2["前灯电压"] == 12)
            {
                comboBox_HeadLightVol.SelectedIndex = 1;
            }
            else if (Params2["前灯电压"] == 0xFF)
            {
                comboBox_HeadLightVol.SelectedIndex = 2;
            }
            else if (Params2["前灯电压"] == 0)
            {
                comboBox_HeadLightVol.SelectedIndex = 3;
            }
            if (Params2["尾灯电压"] == 6)
            {
                comboBox_TailLightVol.SelectedIndex = 0;
            }
            else if (Params2["尾灯电压"] == 12)
            {
                comboBox_TailLightVol.SelectedIndex = 1;
            }
            else if (Params2["尾灯电压"] == 0xFF)
            {
                comboBox_TailLightVol.SelectedIndex = 2;
            }
            else if (Params2["尾灯电压"] == 0)
            {
                comboBox_TailLightVol.SelectedIndex = 3;
            }
            textBox_AlarmSpeed.Text = ((float)(Params2["报警阈值"]) / 10.0f).ToString("#0.0");
            textBox_LightPluse.Text = Params2["尾灯脉宽"].ToString();
            textBox_LightPeriod.Text = Params2["尾灯周期"].ToString();
            textBox_LimitSpeedStart.Text = ((float)(Params2["起始限速"]) / 10.0f).ToString("#0.0");
            textBox_LimitSpeedStop.Text = ((float)(Params2["结束限速"]) / 10.0f).ToString("#0.0");

            //马达参数
            textBox_RatePower.Text = MotorParam["额定功率"].ToString();
            textBox_RateSpeed.Text = MotorParam["空载转速"].ToString();
            textBox_RotorR.Text = MotorParam["定子电阻"].ToString();
            textBox_Rotor_Lq.Text = MotorParam["定子Lq"].ToString();
            textBox_Rotor_Ld.Text = MotorParam["定子Ld"].ToString();
            textBox_E.Text = MotorParam["反电动势"].ToString();
            textBox_Rate_Vol.Text = MotorParam["额定电压"].ToString();

            //其它信息
            textBox_Mac.Text = Otherinfo["生产商"].ToString();
            textBox_Mac_Addr.Text = Otherinfo["生产地"].ToString();
            textBox_Mac_Date.Text = Otherinfo["生产日期"].ToString();
            textBox_Secrect.Text = Otherinfo["校验密钥"].ToString();
            textBox_Info1.Text = Otherinfo["信息1"].ToString();
            textBox_Info2.Text = Otherinfo["信息2"].ToString();
            textBox_Info3.Text = Otherinfo["信息3"].ToString();
            
            //测试阈值
            textBox_NC_Current.Text = TestThData["空载电流"].ToString();
            textBox_SpeedTh.Text = TestThData["车速"].ToString();
            textBox_GasSpeedTh.Text = TestThData["指拨转速"].ToString();
            textBox_Zero_Min.Text = TestThData["零偏最小值"].ToString();
            textBox_Zero_Max.Text = TestThData["零偏最大值"].ToString();
            textBox_K_Min.Text = ((float)(TestThData["标定系数最小值"]) / 100.0f).ToString("#0.00");
            textBox_K_Max.Text = ((float)(TestThData["标定系数最大值"]) / 100.0f).ToString("#0.00");
            textBox_Start_Min.Text = TestThData["启动值最小值"].ToString();
            textBox_Start_Max.Text = TestThData["启动值最大值"].ToString();

            //其它测试备注信息
            textBox_HW_Version.Text = MarkInfo["PCBA版号"];

            //TE版本信息
            textBox_TE_FW_Version.Text = "N_A";
        }

        private bool DisplaySetToParams()
        {
            try
            {
                //参数1
                Params1.Clear();
                if (comboBox_StartMode.Text == "柔和")
                {
                    Params1.Add("启动模式", 1);
                }
                else if (comboBox_StartMode.Text == "正常")
                {
                    Params1.Add("启动模式", 2);
                }
                else if (comboBox_StartMode.Text == "强劲")
                {
                    Params1.Add("启动模式", 3);
                }
                else
                {
                    MessageBox.Show("请检查启动模式设置！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    return false;
                }
                Params1.Add("停机时间", Convert.ToUInt16(textBox_StopTime.Text));
                if (Params1["停机时间"] < 50 || Params1["停机时间"] > 500)
                {
                    MessageBox.Show("停机时间有效值：50～500 ！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    return false;
                }
                Params1.Add("限速值", Convert.ToUInt16(textBox_SpeedLimit.Text));
                if (Params1["限速值"] < 5 || Params1["限速值"] > 120)
                {
                    MessageBox.Show("限速值有效值：5～120 ！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    return false;
                }
                Params1.Add("下降速度", Convert.ToUInt16(textBox_Dec.Text));
                if (Params1["下降速度"] < 1 || Params1["下降速度"] > 5)
                {
                    MessageBox.Show("下降速度有效值：1～5 ！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    return false;
                }
                Params1.Add("前飞", Convert.ToUInt16(textBox_T_Front.Text));
                if (Params1["前飞"] < 5 || Params1["前飞"] > 100)
                {
                    MessageBox.Show("前飞有效值：5～100 ！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    return false;
                }
                Params1.Add("后飞", Convert.ToUInt16(textBox_T_Tail.Text));
                if (Params1["后飞"] < 5 || Params1["后飞"] > 100)
                {
                    MessageBox.Show("后飞有效值：5～100 ！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    return false;
                }
                Params1.Add("限流", Convert.ToUInt16(textBox_MaxCurrent.Text));
                if (Params1["限流"] < 5 || Params1["限流"] > 25)
                {
                    MessageBox.Show("限流有效值：5～25 ！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    return false;
                }
                Params1.Add("温度预警", Convert.ToUInt16(textBox_NTC_Alarm.Text));
                Params1.Add("温度保护", Convert.ToUInt16(textBox_NTC_Ptotect.Text));
                if (comboBox_NoPBU.Text == "有")
                {
                    Params1.Add("码表", 0x55);
                }
                else if (comboBox_NoPBU.Text == "无")
                {
                    Params1.Add("码表", 0xAA);
                }
                else
                {
                    MessageBox.Show("请检查无码表设置！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    return false;
                }
                Params1.Add("轮胎周长", Convert.ToUInt16(textBox_WheelSize.Text));
                if (Params1["轮胎周长"] < 80 || Params1["轮胎周长"] > 250)
                {
                    MessageBox.Show("轮胎周长有效值：80～250 ！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    return false;
                }
                Params1.Add("系列号", Convert.ToUInt16(textBox_Serial.Text));
                if (Params1["系列号"] < 1 || Params1["系列号"] > 16)
                {
                    MessageBox.Show("系列号有效值：1～16 ！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    return false;
                }
                Params1.Add("ECO增益", Convert.ToUInt16(float.Parse(textBox_ECO_Gain.Text) * 100));//放大100倍
                Params1.Add("ECO加速", Convert.ToUInt16(float.Parse(textBox_ECO_Acc.Text) * 100));
                Params1.Add("NORM增益", Convert.ToUInt16(float.Parse(textBox_NORM_Gain.Text) * 100));
                Params1.Add("NORM加速", Convert.ToUInt16(float.Parse(textBox_NORM_Acc.Text) * 100));
                Params1.Add("SPORT增益", Convert.ToUInt16(float.Parse(textBox_SPORT_Gain.Text) * 100));
                Params1.Add("SPORT加速", Convert.ToUInt16(float.Parse(textBox_SPORT_Acc.Text) * 100));
                Params1.Add("TURBO增益", Convert.ToUInt16(float.Parse(textBox_TURBO_Gain.Text) * 100));
                Params1.Add("TURBO加速", Convert.ToUInt16(float.Parse(textBox_TURBO_Acc.Text) * 100));
                Params1.Add("SMART增益", Convert.ToUInt16(float.Parse(textBox_SMART_Gain.Text) * 100));
                Params1.Add("SMART加速", Convert.ToUInt16(float.Parse(textBox_SMART_Acc.Text) * 100));
                Params1.Add("车速级数", Convert.ToUInt16(textBox_SpeedSensor.Text));
                Params1.Add("踏频启动", Convert.ToUInt16(textBox_CadenceStart.Text));
                if (comboBox_GasMode.Text == "不支持")
                {
                    Params1.Add("指拨模式", 0x55);
                }
                else if (comboBox_GasMode.Text == "支持")
                {
                    Params1.Add("指拨模式", 0xAA);
                }
                else
                {
                    MessageBox.Show("请检查指拨模式设置！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    return false;
                }
                if (comboBox_SpeedSensor.Text == "传感器")
                {
                    Params1.Add("速度信号来源", 0x55);
                }
                else if (comboBox_SpeedSensor.Text == "踏频")
                {
                    Params1.Add("速度信号来源", 0xAA);
                }
                else if (comboBox_SpeedSensor.Text == "通信")
                {
                    Params1.Add("速度信号来源", 0xEE);
                }
                else
                {
                    MessageBox.Show("请检查速度信号来源设置！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    return false;
                }
                Params1.Add("周长微调", Convert.ToUInt16((byte)(Convert.ToSByte(textBox_WheelSizeAdj.Text))));
                Params1.Add("低压保护", Convert.ToUInt16(textBox_UV_Protect.Text));//mV
                Params1.Add("推行限速", Convert.ToUInt16(float.Parse(textBox_Walk_SpeedLimit.Text) * 10));//放大10倍
                Params1.Add("推行转速", Convert.ToUInt16(textBox_WalkSpeed.Text));

                //参数2
                Params2.Clear();
                if (comboBox_AstSensor.Text == "不支持")
                {
                    Params2.Add("姿态传感器", 0x55);
                }
                else if (comboBox_AstSensor.Text == "支持")
                {
                    Params2.Add("姿态传感器", 0xAA);
                }
                else
                {
                    MessageBox.Show("请检查姿态传感器设置！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    return false;
                }

                Params2.Add("俯仰角零偏", Convert.ToUInt16((UInt16)(float.Parse(textBox_Angle_P.Text) * 10)));
                Params2.Add("横滚角零偏", Convert.ToUInt16((UInt16)(float.Parse(textBox_Angle_R.Text) * 10)));

                if (comboBox_LightMode.Text == "模式 1")
                {
                    Params2.Add("尾灯模式", 1);
                }
                else if(comboBox_LightMode.Text == "模式 2")
                {
                    Params2.Add("尾灯模式", 2);
                }
                else if (comboBox_LightMode.Text == "模式 3")
                {
                    Params2.Add("尾灯模式", 3);
                }
                else if (comboBox_LightMode.Text == "模式 4")
                {
                    Params2.Add("尾灯模式", 4);
                }
                else if (comboBox_LightMode.Text == "模式 5")
                {
                    Params2.Add("尾灯模式", 5);
                }
                else if (comboBox_LightMode.Text == "模式 6")
                {
                    Params2.Add("尾灯模式", 6);
                }
                if (comboBox_HeadLightVol.Text == "6V")
                {
                    Params2.Add("前灯电压", 6);
                }
                else if (comboBox_HeadLightVol.Text == "12V")
                {
                    Params2.Add("前灯电压", 12);
                }
                else if (comboBox_HeadLightVol.Text == "随电池")
                {
                    Params2.Add("前灯电压", 0xFF);
                }
                else if (comboBox_HeadLightVol.Text == "硬件配置")
                {
                    Params2.Add("前灯电压", 0);
                }
                if (comboBox_TailLightVol.Text == "6V")
                {
                    Params2.Add("尾灯电压", 6);
                }
                else if (comboBox_TailLightVol.Text == "12V")
                {
                    Params2.Add("尾灯电压", 12);
                }
                else if (comboBox_TailLightVol.Text == "随电池")
                {
                    Params2.Add("尾灯电压", 0xFF);
                }
                else if (comboBox_TailLightVol.Text == "硬件配置")
                {
                    Params2.Add("尾灯电压", 0);
                }
                Params2.Add("报警阈值", Convert.ToUInt16(float.Parse(textBox_AlarmSpeed.Text) * 10));//放大10倍
                Params2.Add("尾灯脉宽", Convert.ToUInt16(textBox_LightPluse.Text));
                Params2.Add("尾灯周期", Convert.ToUInt16(textBox_LightPeriod.Text));
                Params2.Add("起始限速", Convert.ToUInt16((byte)(float.Parse(textBox_LimitSpeedStart.Text) * 10)));
                Params2.Add("结束限速", Convert.ToUInt16((byte)(float.Parse(textBox_LimitSpeedStop.Text) * 10)));

                //马达参数
                MotorParam.Clear();
                MotorParam.Add("额定功率", Convert.ToUInt16(textBox_RatePower.Text));
                MotorParam.Add("空载转速", Convert.ToUInt16(textBox_RateSpeed.Text));
                MotorParam.Add("定子电阻", Convert.ToUInt16(textBox_RotorR.Text));
                MotorParam.Add("定子Lq", Convert.ToUInt16(textBox_Rotor_Lq.Text));
                MotorParam.Add("定子Ld", Convert.ToUInt16(textBox_Rotor_Ld.Text));
                MotorParam.Add("反电动势", Convert.ToUInt16(textBox_E.Text));
                MotorParam.Add("额定电压", Convert.ToUInt16(textBox_Rate_Vol.Text));

                //其它信息
                Otherinfo.Clear();
                Otherinfo.Add("生产商", textBox_Mac.Text);
                Otherinfo.Add("生产地", textBox_Mac_Addr.Text);
                Otherinfo.Add("生产日期", textBox_Mac_Date.Text);
                Otherinfo.Add("校验密钥", textBox_Secrect.Text);
                Otherinfo.Add("信息1", textBox_Info1.Text);
                Otherinfo.Add("信息2", textBox_Info2.Text);
                Otherinfo.Add("信息3", textBox_Info3.Text);

                //测试阈值
                TestThData.Clear();
                TestThData.Add("空载电流", Convert.ToUInt16(textBox_NC_Current.Text));
                TestThData.Add("车速", Convert.ToUInt16(textBox_SpeedTh.Text));
                TestThData.Add("指拨转速", Convert.ToUInt16(textBox_GasSpeedTh.Text));
                TestThData.Add("零偏最小值", Convert.ToUInt16(textBox_Zero_Min.Text));
                TestThData.Add("零偏最大值", Convert.ToUInt16(textBox_Zero_Max.Text));
                TestThData.Add("标定系数最小值", Convert.ToUInt16(float.Parse(textBox_K_Min.Text) * 100));
                TestThData.Add("标定系数最大值", Convert.ToUInt16(float.Parse(textBox_K_Max.Text) * 100));
                TestThData.Add("启动值最小值", Convert.ToUInt16(textBox_Start_Min.Text));
                TestThData.Add("启动值最大值", Convert.ToUInt16(textBox_Start_Max.Text));

                //其它测试备注信息
                MarkInfo.Clear();
                if (textBox_HW_Version.Text == string.Empty)
                {
                    MessageBox.Show("请输入PCBA版号！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                    return false;
                }
                else
                {
                    MarkInfo.Add("PCBA版号", textBox_HW_Version.Text);
                }

                return true;
            }
            catch(Exception ex)
            {
                MessageBox.Show(ex.Message, "提示", MessageBoxButtons.OK, MessageBoxIcon.Warning);
                return false;
            }
        }

        private void button_Default_Click(object sender, EventArgs e)
        {
            if (MessageBox.Show("确认恢复默认值？", "提示", MessageBoxButtons.OKCancel, MessageBoxIcon.Question) != DialogResult.OK)
            {
                return;
            }
            SetDefault();
            ParamsDisplayUpdate();
        }

        private void button_Generate_Click(object sender, EventArgs e)
        {
            if (MessageBox.Show("确认提交？", "提示", MessageBoxButtons.OKCancel, MessageBoxIcon.Question) != DialogResult.OK)
            {
                return;
            }

            //空间内容更新到字典
            if (DisplaySetToParams() == false)
            {
                MessageBox.Show("参数生成失败！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                return;
            }

            //保存为配置文件
            if (textBox_Model.Text == string.Empty) //判断型号是否填写
            {
                MessageBox.Show("请输入电机型号！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                return;
            }
            if (textBox_Client.Text == string.Empty) //判断订单编号是否填写
            {
                MessageBox.Show("请输入订单号！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                return;
            }
            if (textBox_HW_Version.Text == String.Empty) //判断PCBA板号是否填写
            {
                MessageBox.Show("请输入PCBA板号！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                return;
            }
            if (comboBox_Baudrate.SelectedIndex == -1)
            {
                MessageBox.Show("请设定波特率！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                return;
            }
            Regex Reg = new Regex(@"[V][0-9].[0-9]|[0-9][0-9].[0-9]|[0-9][0-9].[0-9]|[0-9][0-9].[0-9]|[0-9][0-9]_20\d{6}");
            if (Reg.IsMatch(textBox_FW_Version.Text) == false) //判断主控软件版本是否填写
            {
                MessageBox.Show("主控软件版本格式不正确，例如V1.0.0.0.0_20210101 ！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                return;
            }
            if (textBox_TE_FW_Version.Text != "N_A")//兼容单MCU主控板，无TE时填写N_A
            {
                Reg = new Regex(@"[V][0-9].[0-9].[0-9]_20\d{6}"); //判断TE软件版本是否填写
                if (Reg.IsMatch(textBox_TE_FW_Version.Text) == false) //判断TE软件版本是否填写
                {
                    MessageBox.Show("TE软件版本格式不正确，例如N_A或V1.0.0_20210101 ！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                    return;
                }
            }

            button_Generate.BackColor = Color.Red;
            button_Generate.Text = "生成中";
            button_Generate.Enabled = false;

            if (System.IO.Directory.Exists(FilePath) == false)
                System.IO.Directory.CreateDirectory(FilePath);
            string Datenow = DateTime.Now.ToString("yyyy-MM-dd") + "\\";
            if (System.IO.Directory.Exists(FilePath + Datenow) == false)
                System.IO.Directory.CreateDirectory(FilePath + Datenow);
            string fileName = FilePath + Datenow + textBox_Model.Text + "_" + textBox_Client.Text + "_" + textBox_FW_Version.Text + "_" + textBox_TE_FW_Version.Text + "_" + ((textBox_Remark.Text == string.Empty) ? "" : textBox_Remark.Text + "_") + DateTime.Now.ToString("yyyy-MM-dd-HHmmss") + ".ttcfg";
            using (StreamWriter file = new StreamWriter(fileName))
            {
                //用户参数1
                file.WriteLine("[{0}]", "用户参数1");
                foreach (var entry in Params1)
                    if (entry.Key == "码表")
                        file.WriteLine("{0},{1},{2}", entry.Key, entry.Value, entry.Value == 0x55 ? "有" : entry.Value == 0xAA ? "无" : "无效");
                    else if (entry.Key == "指拨模式")
                        file.WriteLine("{0},{1},{2}", entry.Key, entry.Value, entry.Value == 0x55 ? "不支持" : entry.Value == 0xAA ? "支持" : "无效");
                    else if (entry.Key == "速度信号来源")
                        file.WriteLine("{0},{1},{2}", entry.Key, entry.Value, entry.Value == 0x55 ? "传感器" : entry.Value == 0xAA ? "踏频" : entry.Value == 0xEE ? "通信" : "无效");
                    else
                        file.WriteLine("{0},{1}", entry.Key, entry.Value);
                //用户参数2
                file.WriteLine("");
                file.WriteLine("[{0}]", "用户参数2");
                foreach (var entry in Params2)
                    if (entry.Key == "姿态传感器")
                        file.WriteLine("{0},{1},{2}", entry.Key, entry.Value, entry.Value == 0x55 ? "不支持" : entry.Value == 0xAA ? "支持" : "无效");
                    else if (entry.Key == "前灯电压")
                        file.WriteLine("{0},{1},{2}", entry.Key, entry.Value, entry.Value == 0xFF ? "随电池" : entry.Value == 0 ? "硬件配置" : entry.Value + "V");
                    else if (entry.Key == "尾灯电压")
                        file.WriteLine("{0},{1},{2}", entry.Key, entry.Value, entry.Value == 0xFF ? "随电池" : entry.Value == 0 ? "硬件配置" : entry.Value + "V");
                    else
                        file.WriteLine("{0},{1}", entry.Key, entry.Value);
                //马达参数
                file.WriteLine("");
                file.WriteLine("[{0}]", "马达参数");
                foreach (var entry in MotorParam)
                    file.WriteLine("{0},{1}", entry.Key, entry.Value);
                //其它信息
                file.WriteLine("");
                file.WriteLine("[{0}]", "其它信息");
                foreach (var entry in Otherinfo)
                    file.WriteLine("{0},{1}", entry.Key, entry.Value);
                //测试阈值
                file.WriteLine("");
                file.WriteLine("[{0}]", "测试阈值");
                foreach (var entry in TestThData)
                    file.WriteLine("{0},{1}", entry.Key, entry.Value);

                //其它测试备注信息
                file.WriteLine("");
                file.WriteLine("[{0}]", "其它测试备注信息");
                foreach (var entry in MarkInfo)
                    file.WriteLine("{0},{1}", entry.Key, entry.Value);

            }

            button_Generate.Text = "转换中";

            //保存为Excel文件
            string importExcelName = "FOQC成机参数检验标准_Temple4.xls";
            string exportExcelName = FilePath + Datenow + textBox_Model.Text + "_" + textBox_Client.Text + "_" + ((textBox_Remark.Text == string.Empty) ? "" : textBox_Remark.Text + "_") + DateTime.Now.ToString("yyyy-MM-dd-HHmmss") + ".xls"; 

            try
            {
                
                //导入文件
                IWorkbook workbook = WorkbookFactory.Create(importExcelName);
                //获取第一个工作薄
                ISheet sheet = workbook.GetSheetAt(0);

                #region 开始按行写入单元格
                //第3行，文件信息
                IRow row = sheet.GetRow(2);
                row.GetCell(0).SetCellValue("文件信息 File Info：" + textBox_Model.Text + "_" + textBox_Client.Text + "_" + ((textBox_Remark.Text == string.Empty) ? "" : textBox_Remark.Text + "_") + DateTime.Now.ToString("yyyy-MM-dd-HHmmss"));
                //第5行，第2列型号，第10列SPORT加速
                row = sheet.GetRow(4);
                row.GetCell(1).SetCellValue(textBox_Model.Text);
                row.GetCell(9).SetCellValue(textBox_SPORT_Acc.Text);
                //第6行，第2列SN，第10列TURBO增益
                row = sheet.GetRow(5);
                row.GetCell(1).SetCellValue("Same as marking");
                row.GetCell(9).SetCellValue(textBox_TURBO_Gain.Text);
                //第7行，第2列硬件板号，第10列TURBO加速
                row = sheet.GetRow(6);
                row.GetCell(1).SetCellValue(textBox_HW_Version.Text);
                row.GetCell(9).SetCellValue(textBox_TURBO_Acc.Text);
                //第8行，第2列主控软件版本，第10列SMART增益
                row = sheet.GetRow(7);
                row.GetCell(1).SetCellValue(textBox_FW_Version.Text);
                row.GetCell(9).SetCellValue(textBox_SMART_Gain.Text);
                //第9行，第2列TE软件版本，第10列SMART加速
                row = sheet.GetRow(8);
                row.GetCell(1).SetCellValue(textBox_TE_FW_Version.Text);
                row.GetCell(9).SetCellValue(textBox_SMART_Acc.Text);
                //第10行，第2列BOOT版本，第10列额定功率
                row = sheet.GetRow(9);
                row.GetCell(1).SetCellValue(comboBox_Baudrate.SelectedIndex == 0 ? "V1.2.2 125K" : "V2.0.0 250K");
                row.GetCell(9).SetCellValue(textBox_RatePower.Text + " W");
                //第11行，第2列静态电压，第10列空载转速
                row = sheet.GetRow(10);
                row.GetCell(1).SetCellValue(textBox_Rate_Vol.Text + " ± 1 V");
                row.GetCell(9).SetCellValue(textBox_RateSpeed.Text + " rpm");
                //第12行，第2列静态电流，第10列额定电压
                row = sheet.GetRow(11);
                row.GetCell(1).SetCellValue("≤ 0.050 A");
                row.GetCell(9).SetCellValue(textBox_Rate_Vol.Text + " V");
                //第13行，第2列指拨模式，第10列速度信号个数
                row = sheet.GetRow(12);
                row.GetCell(1).SetCellValue(comboBox_GasMode.Text == "不支持" ? "不支持 No" : "支持 Yes");
                row.GetCell(9).SetCellValue(textBox_SpeedSensor.Text);
                //第14行，第2列启动模式，第10列踏频启动信号个数
                row = sheet.GetRow(13);
                row.GetCell(1).SetCellValue(comboBox_StartMode.Text == "柔和" ? "柔和 Comfort" : comboBox_StartMode.Text == "正常" ? "正常 Normal" : "强劲 Dynamic");
                row.GetCell(9).SetCellValue(textBox_CadenceStart.Text);
                //第15行，第2列停机时间，第10列车速信号来源
                row = sheet.GetRow(14);
                row.GetCell(1).SetCellValue(textBox_StopTime.Text + " ms");
                row.GetCell(9).SetCellValue(comboBox_SpeedSensor.Text == "传感器" ? "传感器 Sensor" : comboBox_SpeedSensor.Text == "踏频" ? "踏频 Cadence" : "通信 CAN");
                //第16行，第2列限速，第10列轮胎周长微调
                row = sheet.GetRow(15);
                row.GetCell(1).SetCellValue(textBox_SpeedLimit.Text + " km/h");
                row.GetCell(9).SetCellValue(textBox_WheelSizeAdj.Text + " cm");
                //第17行，第2列下降速度，第10列推行转速
                row = sheet.GetRow(16);
                row.GetCell(1).SetCellValue("Level " + textBox_Dec.Text);
                row.GetCell(9).SetCellValue(textBox_WalkSpeed.Text + " rpm");
                //第18行，第2列前齿，第10列俯仰角零偏
                row = sheet.GetRow(17);
                row.GetCell(1).SetCellValue(textBox_T_Front.Text + " T");
                row.GetCell(9).SetCellValue(textBox_Angle_P.Text + " °");
                //第19行，第2列后齿，第10列横滚角零偏
                row = sheet.GetRow(18);
                row.GetCell(1).SetCellValue(textBox_T_Tail.Text + " T");
                row.GetCell(9).SetCellValue(textBox_Angle_R.Text + " °");
                //第20行，第2列限流，第10列姿态传感器
                row = sheet.GetRow(19);
                row.GetCell(1).SetCellValue(textBox_MaxCurrent.Text + " A");
                row.GetCell(9).SetCellValue(comboBox_AstSensor.Text == "不支持" ? "不支持 No" : "支持 Yes");
                //第21行，第2列温度预警，第10列尾灯模式
                row = sheet.GetRow(20);
                row.GetCell(1).SetCellValue(textBox_NTC_Alarm.Text + " ℃");
                row.GetCell(9).SetCellValue(comboBox_LightMode.Text.Replace("模式", "Mode"));
                //第22行，第2列温度保护，第10列前灯电压
                row = sheet.GetRow(21);
                row.GetCell(1).SetCellValue(textBox_NTC_Ptotect.Text + " ℃");
                row.GetCell(9).SetCellValue(comboBox_HeadLightVol.Text.Contains("随电池") ? comboBox_HeadLightVol.Text + " " + textBox_Rate_Vol.Text + " V" : comboBox_HeadLightVol.Text.Contains("硬件") ? "硬件配置 By HW" : comboBox_HeadLightVol.Text);
                //第23行，第2列码表，第10列后灯电压
                row = sheet.GetRow(22);
                row.GetCell(1).SetCellValue(comboBox_NoPBU.Text == "有" ? "有 Yes" : "无 No");
                row.GetCell(9).SetCellValue(comboBox_TailLightVol.Text.Contains("随电池") ? comboBox_TailLightVol.Text + " " + textBox_Rate_Vol.Text + " V" : comboBox_TailLightVol.Text.Contains("硬件") ? "硬件配置 By HW" : comboBox_TailLightVol.Text);
                //第24行，第2列轮胎周长，第10列启动值
                row = sheet.GetRow(23);
                row.GetCell(1).SetCellValue(textBox_WheelSize.Text + " cm");
                row.GetCell(9).SetCellValue(textBox_Start_Min.Text + " - " + textBox_Start_Max.Text);
                //第25行，第2列电机系列，第10列校正系数1
                row = sheet.GetRow(24);
                row.GetCell(1).SetCellValue(textBox_Serial.Text);
                row.GetCell(9).SetCellValue(textBox_K_Min.Text + " - " + textBox_K_Max.Text);
                //第26行，第2列低压保护，第10列校正系数2
                row = sheet.GetRow(25);
                row.GetCell(1).SetCellValue(textBox_UV_Protect.Text + " mV");
                if ((textBox_Model.Text.Contains("PG")) || (textBox_Model.Text.Contains("PS")) || (textBox_Model.Text.Contains("J01")))
                    row.GetCell(9).SetCellValue(textBox_K_Min.Text + " - " + textBox_K_Max.Text);
                else
                    row.GetCell(9).SetCellValue("无此项目 None");
                //第27行，第2列推行限速，第10列校正系数3
                row = sheet.GetRow(26);
                row.GetCell(1).SetCellValue(textBox_Walk_SpeedLimit.Text + " km/h");
                if ((textBox_Model.Text.Contains("PG")) || (textBox_Model.Text.Contains("PS")) || (textBox_Model.Text.Contains("J01")))
                    row.GetCell(9).SetCellValue(textBox_K_Min.Text + " - " + textBox_K_Max.Text);
                else
                    row.GetCell(9).SetCellValue("无此项目 None");
                //第28行，第2列ECO增益，第10列零点值1
                row = sheet.GetRow(27);
                row.GetCell(1).SetCellValue(textBox_ECO_Gain.Text);
                row.GetCell(9).SetCellValue(textBox_Zero_Min.Text + " - " + textBox_Zero_Max.Text);
                //第29行，第2列ECO加速，第10列零点值2
                row = sheet.GetRow(28);
                row.GetCell(1).SetCellValue(textBox_ECO_Acc.Text);
                if ((textBox_Model.Text.Contains("PG")) || (textBox_Model.Text.Contains("PS")) || (textBox_Model.Text.Contains("J01")))
                    row.GetCell(9).SetCellValue(textBox_Zero_Min.Text + " - " + textBox_Zero_Max.Text);
                else
                    row.GetCell(9).SetCellValue("无此项目 None");
                //第30行，第2列NORM增益，第10列零点值3
                row = sheet.GetRow(29);
                row.GetCell(1).SetCellValue(textBox_NORM_Gain.Text);
                if ((textBox_Model.Text.Contains("PG")) || (textBox_Model.Text.Contains("PS")) || (textBox_Model.Text.Contains("J01")))
                    row.GetCell(9).SetCellValue(textBox_Zero_Min.Text + " - " + textBox_Zero_Max.Text);
                else
                    row.GetCell(9).SetCellValue("无此项目 None");
                //第31行，第2列NORM加速，第10列骑行历史
                row = sheet.GetRow(30);
                row.GetCell(1).SetCellValue(textBox_NORM_Acc.Text);
                row.GetCell(9).SetCellValue("0 km / 0 min");
                //第32行，第2列SPORT增益，第10列故障码
                row = sheet.GetRow(31);
                row.GetCell(1).SetCellValue(textBox_SPORT_Gain.Text);
                row.GetCell(9).SetCellValue("无故障记录 None");
                //第33行，第2列尾灯脉宽，第10列尾灯周期
                row = sheet.GetRow(32);
                row.GetCell(1).SetCellValue(textBox_LightPluse.Text + "\n" + ((float)Convert.ToDouble(textBox_LightPluse.Text) / 15000f).ToString("0.000") + " s");
                row.GetCell(9).SetCellValue(textBox_LightPeriod.Text + "\n" + ((float)Convert.ToDouble(textBox_LightPeriod.Text) / 15000f).ToString("0.000") + " s");
                //第34行，第2列超速报警阈值，第11列限速起始偏移
                row = sheet.GetRow(33);
                row.GetCell(1).SetCellValue(textBox_AlarmSpeed.Text + " km/h");
                row.GetCell(9).SetCellValue(textBox_LimitSpeedStart.Text + " km/h");
                //第35行，第2列限速结束偏移
                row = sheet.GetRow(34);
                row.GetCell(1).SetCellValue(textBox_LimitSpeedStop.Text + " km/h");
                #endregion

                using (FileStream file = File.OpenWrite(exportExcelName))
                {
                    workbook.Write(file);
                    workbook.Close();
                }
            }
            catch (Exception ex)
            {
                throw (ex);
            }

            //文件转换为pdf格式保存
            string exportPdfName = FilePath + Datenow + textBox_Model.Text + "_" + textBox_Client.Text + "_" + ((textBox_Remark.Text == string.Empty) ? "" : textBox_Remark.Text + "_") + DateTime.Now.ToString("yyyy-MM-dd-HHmmss") + ".pdf";
            Workbook workbook_1 = new Workbook();//创建Workbook类的实例
            workbook_1.LoadFromFile(exportExcelName);//加载Excel工作簿           
            workbook_1.SaveToFile(exportPdfName, FileFormat.PDF);//将整个工作薄保存为PDF

            MessageBox.Show("参数已生成，进入文件管理页面查看！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);

            button_Generate.Text = "上传中";

            //发送文件到服务器
            if (StartForm.myFtp.IsNetConnected == true)
            {
                string DateNow = DateTime.Now.ToString("yyyy-MM-dd");
                int okCnt = 0;
                if (StartForm.myFtp.DirectoryExist(StartForm.myServerCfg.RootPath + "/cfg/", DateNow) == false)
                {
                    StartForm.myFtp.MakeDir(StartForm.myServerCfg.RootPath + "/cfg/" + DateNow);
                }
                //上传配置文件
                bool result = StartForm.myFtp.UploadFile(fileName, StartForm.myServerCfg.RootPath + "/cfg/" + DateNow);
                if (result == true)
                {
                    okCnt++;
                    //MessageBox.Show("配置文件上传服务器成功！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                }
                //上传配置清单excel
                result = StartForm.myFtp.UploadFile(exportExcelName, StartForm.myServerCfg.RootPath + "/cfg/" + DateNow);
                if (result == true)
                {
                    okCnt++;
                    //MessageBox.Show("配置检验清单上传服务器成功！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                }
                //上传配置清单pdf
                result = StartForm.myFtp.UploadFile(exportPdfName, StartForm.myServerCfg.RootPath + "/cfg/" + DateNow);
                if (result == true)
                {
                    okCnt++;
                    //MessageBox.Show("配置检验清单上传服务器成功！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                }
                if (okCnt >= 3)
                {
                    MessageBox.Show("配置检验文件上传服务器成功！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Information);
                }
                else
                {
                    MessageBox.Show("配置检验文件上传服务器失败！", "提示", MessageBoxButtons.OK, MessageBoxIcon.Error);
                }
            }

            button_Generate.Text = "生成";
            button_Generate.BackColor = System.Drawing.Color.FromArgb(((int)(((byte)(48)))), ((int)(((byte)(113)))), ((int)(((byte)(185)))));
            button_Generate.Enabled = true;

        }

        private void button_keyboard_Click(object sender, EventArgs e)
        {
            System.Diagnostics.Process.Start("osk.exe");
        }

        //输入型号时自动更新关键参数
        private void textBox_Model_TextChanged(object sender, EventArgs e)
        {
            if (textBox_Model.Text.Contains("J01"))
            {
                textBox_Serial.Text = "1";//系列号
                textBox_MaxCurrent.Text = "13";//限流
                textBox_RatePower.Text = "250";//额定功率
                textBox_RateSpeed.Text = "1200";//额定转速
                textBox_Rate_Vol.Text = "36";//额定电压
                textBox_NC_Current.Text = "800";//空载电流
                textBox_Zero_Min.Text = "100";//零偏下限
                textBox_Zero_Max.Text = "2000";//零偏上限
                textBox_K_Min.Text = "0.40";//传感器标定值下限
                textBox_K_Max.Text = "1.20";//传感器标定值下限
                textBox_Start_Min.Text = "280";//启动值下限
                textBox_Start_Max.Text = "500";//启动值上限
                textBox_GasSpeedTh.Text = (Convert.ToInt16(textBox_SpeedLimit.Text) * 49).ToString();
            }
            else if (textBox_Model.Text.Contains("VL"))
            {
                textBox_Serial.Text = "1";//系列号
                textBox_MaxCurrent.Text = "13";//限流
                textBox_RatePower.Text = "250";//额定功率
                textBox_RateSpeed.Text = "1200";//额定转速
                textBox_Rate_Vol.Text = "36";//额定电压
                textBox_NC_Current.Text = "800";//空载电流
                textBox_Zero_Min.Text = "200";//零偏下限
                textBox_Zero_Max.Text = "1800";//零偏上限
                textBox_K_Min.Text = "0.25";//传感器标定值下限
                textBox_K_Max.Text = "0.75";//传感器标定值下限
                textBox_Start_Min.Text = "350";//启动值下限
                textBox_Start_Max.Text = "750";//启动值上限
                if (textBox_Model.Text.Contains("03") || textBox_Model.Text.Contains("13"))
                {
                    textBox_GasSpeedTh.Text = "200";
                }
                else
                { 
                    textBox_GasSpeedTh.Text = (Convert.ToInt16(textBox_SpeedLimit.Text) * 49).ToString(); 
                }
            }
            else if (textBox_Model.Text.Contains("VS"))
            {
                textBox_Serial.Text = "2";//系列号
                textBox_MaxCurrent.Text = "15";//限流
                textBox_RatePower.Text = "250";//额定功率
                textBox_RateSpeed.Text = "1200";//额定转速
                textBox_Rate_Vol.Text = "36";//额定电压
                textBox_NC_Current.Text = "800";//空载电流
                textBox_Zero_Min.Text = "200";//零偏下限
                textBox_Zero_Max.Text = "1800";//零偏上限
                textBox_K_Min.Text = "0.25";//传感器标定值下限
                textBox_K_Max.Text = "0.75";//传感器标定值下限
                textBox_Start_Min.Text = "350";//启动值下限
                textBox_Start_Max.Text = "750";//启动值上限
                if (textBox_Model.Text.Contains("03") || textBox_Model.Text.Contains("13"))
                {
                    textBox_GasSpeedTh.Text = "200";
                }
                else
                {
                    textBox_GasSpeedTh.Text = (Convert.ToInt16(textBox_SpeedLimit.Text) * 49).ToString();
                }
            }
            else if (textBox_Model.Text.Contains("VR"))
            {
                textBox_Serial.Text = "2";//系列号
                textBox_MaxCurrent.Text = "15";//限流
                textBox_RatePower.Text = "250";//额定功率
                textBox_RateSpeed.Text = "1200";//额定转速
                textBox_Rate_Vol.Text = "36";//额定电压
                textBox_NC_Current.Text = "800";//空载电流
                textBox_Zero_Min.Text = "200";//零偏下限
                textBox_Zero_Max.Text = "1800";//零偏上限
                textBox_K_Min.Text = "0.25";//传感器标定值下限
                textBox_K_Max.Text = "0.75";//传感器标定值下限
                textBox_Start_Min.Text = "350";//启动值下限
                textBox_Start_Max.Text = "750";//启动值上限
                textBox_GasSpeedTh.Text = (Convert.ToInt16(textBox_SpeedLimit.Text) * 49).ToString();
            }
            else if (textBox_Model.Text.Contains("PG"))
            {
                textBox_Serial.Text = "3";//系列号
                textBox_MaxCurrent.Text = "17";//限流
                textBox_RatePower.Text = "250";//额定功率
                textBox_RateSpeed.Text = "1550";//额定转速
                textBox_Rate_Vol.Text = "36";//额定电压
                textBox_NC_Current.Text = "1000";//空载电流
                textBox_Zero_Min.Text = "100";//零偏下限
                textBox_Zero_Max.Text = "2000";//零偏上限
                textBox_K_Min.Text = "0.25";//传感器标定值下限
                textBox_K_Max.Text = "1.20";//传感器标定值下限
                textBox_Start_Min.Text = "280";//启动值下限
                textBox_Start_Max.Text = "500";//启动值上限
                textBox_GasSpeedTh.Text = (Convert.ToInt16(textBox_SpeedLimit.Text) * 49).ToString();
            }
            else if (textBox_Model.Text.Contains("PS"))
            {
                textBox_Serial.Text = "4";//系列号
                textBox_MaxCurrent.Text = "17";//限流
                textBox_RatePower.Text = "500";//额定功率
                textBox_RateSpeed.Text = "1650";//额定转速
                textBox_Rate_Vol.Text = "48";//额定电压
                textBox_NC_Current.Text = "1000";//空载电流
                textBox_Zero_Min.Text = "100";//零偏下限
                textBox_Zero_Max.Text = "2000";//零偏上限
                textBox_K_Min.Text = "0.25";//传感器标定值下限
                textBox_K_Max.Text = "1.20";//传感器标定值下限
                textBox_Start_Min.Text = "280";//启动值下限
                textBox_Start_Max.Text = "500";//启动值上限
                textBox_GasSpeedTh.Text = (Convert.ToInt16(textBox_SpeedLimit.Text) * 49).ToString();
            }
            else
            {
                textBox_Serial.Text = "";//系列号
                textBox_MaxCurrent.Text = "";//限流
                textBox_RatePower.Text = "";//额定功率
                textBox_RateSpeed.Text = "";//额定转速
                textBox_Rate_Vol.Text = "";//额定电压
                textBox_NC_Current.Text = "";//空载电流
                textBox_Zero_Min.Text = "";//零偏下限
                textBox_Zero_Max.Text = "";//零偏上限
                textBox_K_Min.Text = "";//传感器标定值下限
                textBox_K_Max.Text = "";//传感器标定值下限
                textBox_Start_Min.Text = "";//启动值下限
                textBox_Start_Max.Text = "";//启动值上限
                textBox_GasSpeedTh.Text = "";
            }
        }

        //输入限速时更改指拨转速阈值
        private void textBox_SpeedLimit_TextChanged(object sender, EventArgs e)
        {
            if (textBox_SpeedLimit.Text == "")
                return;

            if ((!textBox_Model.Text.Contains("6503")) && (!textBox_Model.Text.Contains("6513")) && (!textBox_Model.Text.Contains("7503")) && (!textBox_Model.Text.Contains("7513")))
            { 
                textBox_GasSpeedTh.Text = (Convert.ToInt16(textBox_SpeedLimit.Text) * 49).ToString();
            }
        }

        //更改尾灯模式时更改尾灯脉宽和周期
        private void comboBox_LightMode_SelectedIndexChanged(object sender, EventArgs e)
        {
            if (comboBox_LightMode.SelectedIndex == 0) // 模式1，开灯低亮，刹车高亮
            {
                textBox_AlarmSpeed.Text = "15.0";
                textBox_LightPluse.Text = "75";
                textBox_LightPeriod.Text = "150";
            }
            else if (comboBox_LightMode.SelectedIndex == 5) // 模式6，超速报警
            {
                textBox_AlarmSpeed.Text = "15.0";
                textBox_LightPluse.Text = "7500";
                textBox_LightPeriod.Text = "45000";
            }
        }

        //指拨转速阈值修改
        private void textBox_GasSpeedTh_TextChanged(object sender, EventArgs e)
        {
            UInt32 DataTemp = 0;

            if (textBox_GasSpeedTh.Text == "")
            {
                return;
            }
            DataTemp = Convert.ToUInt32(textBox_GasSpeedTh.Text);
            if (textBox_Model.Text.Contains("VL"))
            {
                if (DataTemp >= 1200)
                {
                    textBox_GasSpeedTh.Text = "1200";
                }
            }
            else if (textBox_Model.Text.Contains("VS"))
            {
                if (DataTemp >= 1200)
                {
                    textBox_GasSpeedTh.Text = "1200";
                }
            }
            else if (textBox_Model.Text.Contains("PG"))
            {
                if (DataTemp >= 1400)
                {
                    textBox_GasSpeedTh.Text = "1400";
                }
            }
            else if (textBox_Model.Text.Contains("PS"))
            {
                if (DataTemp >= 1600)
                {
                    textBox_GasSpeedTh.Text = "1600";
                }
            }
        }

        //参数1颜色块
        private void label_UnlockParams1_MouseHover(object sender, EventArgs e)
        {
            // 创建the ToolTip 
            ToolTip toolTip1 = new ToolTip();

            // 设置显示样式
            toolTip1.AutoPopDelay = 5000;//提示信息的可见时间
            toolTip1.InitialDelay = 20;//事件触发多久后出现提示
            toolTip1.ReshowDelay = 20;//指针从一个控件移向另一个控件时，经过多久才会显示下一个提示框
            toolTip1.ShowAlways = true;//是否显示提示框

            //  设置伴随的对象.
            toolTip1.SetToolTip(this.label_UnlockParams1, "依据订单评审表填写");//设置提示按钮和提示内容
        }

        //参数颜色块2
        private void label_UnlockParams2_MouseHover(object sender, EventArgs e)
        {
            // 创建the ToolTip 
            ToolTip toolTip1 = new ToolTip();

            // 设置显示样式
            toolTip1.AutoPopDelay = 5000;//提示信息的可见时间
            toolTip1.InitialDelay = 20;//事件触发多久后出现提示
            toolTip1.ReshowDelay = 20;//指针从一个控件移向另一个控件时，经过多久才会显示下一个提示框
            toolTip1.ShowAlways = true;//是否显示提示框

            //  设置伴随的对象.
            toolTip1.SetToolTip(this.label_UnlockParams2, "依据产品规格书填写");//设置提示按钮和提示内容
        }

        //参数颜色块3
        private void label_UnlockParams3_MouseHover(object sender, EventArgs e)
        {
            // 创建the ToolTip 
            ToolTip toolTip1 = new ToolTip();

            // 设置显示样式
            toolTip1.AutoPopDelay = 5000;//提示信息的可见时间
            toolTip1.InitialDelay = 20;//事件触发多久后出现提示
            toolTip1.ReshowDelay = 100;//指针从一个控件移向另一个控件时，经过多久才会显示下一个提示框
            toolTip1.ShowAlways = true;//是否显示提示框

            //  设置伴随的对象.
            toolTip1.SetToolTip(this.label_UnlockParams3, "客户非标准需求");//设置提示按钮和提示内容
        }

        //参数颜色块4
        private void label_UnlockParams4_MouseHover(object sender, EventArgs e)
        {
            // 创建the ToolTip 
            ToolTip toolTip1 = new ToolTip();

            // 设置显示样式
            toolTip1.AutoPopDelay = 5000;//提示信息的可见时间
            toolTip1.InitialDelay = 20;//事件触发多久后出现提示
            toolTip1.ReshowDelay = 20;//指针从一个控件移向另一个控件时，经过多久才会显示下一个提示框
            toolTip1.ShowAlways = true;//是否显示提示框

            //  设置伴随的对象.
            toolTip1.SetToolTip(this.label_UnlockParams4, "预留参数");//设置提示按钮和提示内容
        }
    }
}