motor_ctl-1/2.MotorDrive/Source/uart_monitor.c

/************************************************************************
 Project:             Welling FAN Motor Developing platform
 Filename:            uart_monitor.c
 Partner Filename:    uart_monitor.h
 Description:         Partner file of uart_monitor.h
 Complier:            IAR Embedded Workbench for ARM 7.80, IAR Systems.
 CPU TYPE :           ST32F0xx
*************************************************************************
 Copyright (c) 2019 Welling Motor Technology(Shanghai) Co. Ltd.
 All rights reserved.
*************************************************************************
*************************************************************************
Revising History (ECL of this file):
20191225, by cyf, create this file;
************************************************************************/

/************************************************************************
 Beginning of File, do not put anything above here except notes
 Compiler Directives:
*************************************************************************/
#ifndef _UART_MONITOR_C_
    #define _UART_MONITOR_C_
#endif

#define FALSE                          (0U)
#define TRUE                           (1U)

/************************************************************************
 Included File:
*************************************************************************/
#include "uart_monitor.h"
//#include "api.h"
#include "board_config.h"
#include "spdctrFSM.h"

/************************************************************************
 Exported Functions:
*************************************************************************/
ULONG TempPara1=11;
ULONG TempPara2=22;
ULONG TempPara3=33;
ULONG TempPara4=44;
/*--------------------------------------------------------------------------------
                         Parameter group (R/W)
--------------------------------------------------------------------------------*/
UWORD* UART_pParaTable[PARA_TABLE_SIZE]=	
{
	HIGH_WORD(dummy32)  	,	//  000	     P-00(Reserve) Never use!!
	LOW_WORD(dummy32)    	,	//  001	     P-00(Reserve) Never use!!
/*--------------------------------------------------------------------------------
                32-bits parameters (signed or unsigned)
--------------------------------------------------------------------------------*/	
	//--------P01----------
	HIGH_WORD(TempPara4)  	,	//  002	     P-01(high word)
	LOW_WORD(TempPara4)  	,	//  003	     P-01(low  word)
	//--------P02----------
	HIGH_WORD(TempPara4)  	,	//  004	     P-02(high word)
	LOW_WORD(TempPara4)  	,	//  005      P-02(low  word)
	//--------P03----------
	HIGH_WORD(TempPara4)  	,	//  006	     P-03(high word)
	LOW_WORD(TempPara4)  	,	//  007	     P-03(low  word)
	//--------P04----------
	HIGH_WORD(TempPara4)  	,	//  008	     P-04(high word)
	LOW_WORD(TempPara4)  	,	//  009	     P-04(low  word)
	//--------P05----------
	HIGH_WORD(dummy32)  	,	//  010      P-05(high word)
	LOW_WORD(dummy32) ,	//  011	     P-05(low  word)
	//--------P06----------
	HIGH_WORD(dummy32)  	,	//  012	     P-06(high word)
	LOW_WORD(dummy32)  	,	//  013	     P-06(low  word)
/*--------------------------------------------------------------------------------
              16-bits parameters (signed or unsigned)
--------------------------------------------------------------------------------*/
	//--------P07----------
	&placeholder[0]  	        ,	//  014	     Don't change!
	LOW_WORD(dummy32)  	,	//  015	     P-07(one word)
	//--------P08----------
	&placeholder[1]  	,	//  016	     Don't change!
	LOW_WORD(dummy32)  	,	//  017	     P-08(one word)
	//--------P09----------
	&placeholder[2]  	,	//  018	     Don't change!
	LOW_WORD(dummy32)  	,	//  019	     P-09(one word)        
	//--------P10----------
	&placeholder[3]  	,	//  020	     Don't change!
	LOW_WORD(dummy32)    //  021	     P-10(one word)
};
/*************************************************************** 
 Function: uart_voMonitorInit
 Description: Initialize hardware
 Call by: hwsetup;
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
void uart_voMonitorInit(void)
{
    UBYTE i = 0;
    UART_fpError = (CB_ERROR)CBError_monitor;      // Store CallBack function pointers  
    uart_Read_Poll2(RX_BUFFER_SIZE,uart_pReadBuffer,uart_voCBDoneRead);
    //--- insert stack initialization ---
    for(i=0;i<MSG_QUEUE_SIZE;i++) 
    {
       	UART_stMsgQueue[i].stMsg.enType = UART_NULL;
       	if(i==(MSG_QUEUE_SIZE-1)) 
        {
            UART_stMsgQueue[i].pNext = &UART_stMsgQueue[0];
        }
       	else
        {
            UART_stMsgQueue[i].pNext = &UART_stMsgQueue[i+1];
        }
    }	
    UART_Config = UART_stConfigLEN;       	             
}
/*************************************************************** 
 Function
 Description: 
 Call by: main;
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
void CBDoneRead2(UART_ERR_Type _err, ULONG _NumBytes)
{
    switch(_err)
    {
        case UART_ERR_OK:
            uart_DataNum2 = _NumBytes;		// copy received data number
            break;
        case UART_ERR_TIMEOUT:
            break;

        default:
             uart_Read_Poll2(RX_BUFFER_SIZE,uart_pReadBuffer2,CBDoneRead2);//ly add           
            break;
    }
}

/*************************************************************** 
 Function
 Description: Query flag ,then callback decode function
 Call by: main;
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
void uart_voMainDec(void)
{ 	
    if(UART_uwRxNum)	
    {	
        uart_voDecode();
        UART_uwRxNum = 0;	 // clear UART_uwRxNum for the next read !!                 	          
        uart_Read_Poll2(RX_BUFFER_SIZE,uart_pReadBuffer,uart_voCBDoneRead);
    }
}
/*************************************************************** 
 Function
 Description: decode instruction
 Call by: UART_voMainDec();
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
void uart_voDecode(void)
{ 
    UWORD i;	
    UBYTE temp_ubCheckCode;
    ULONG temp_ulAddr[CHANNEL_NUM];
    UART_MSG twmp_stMesg;	
    //---------------------- Serial-X application -----------------------------
    if(UART_uwRxNum == UART_CMD_LENGTH)
    {	
        temp_ubCheckCode = uart_ubCheckXOR(UART_ubReadBuffer,UART_CMD_LENGTH-1);	        
        if(temp_ubCheckCode == UART_ubReadBuffer[UART_CMD_LENGTH-1])	
        {	                    
            //++++++++++++++++++++ decode monitor address ++++++++++++++++++++++++
            if((UART_ubReadBuffer[0]==0x11)&&(UART_ubReadBuffer[1]==0x00))
            {	
                if(UART_ubReadBuffer[UART_CMD_LENGTH-2])
                {
                    UART_bMonSwitch = TRUE; 
                }
                else                        
                {
                    UART_bMonSwitch = FALSE;
                }
                if(UART_bMonSwitch)// *Application Specific*
                {
                    temp_ulAddr[0] = 0x20000000 + ((ULONG)UART_ubReadBuffer[2]  << 16) + ((ULONG)UART_ubReadBuffer[3]  << 8) + ((ULONG)UART_ubReadBuffer[4] );
                    temp_ulAddr[1] = 0x20000000 + ((ULONG)UART_ubReadBuffer[5]  << 16) + ((ULONG)UART_ubReadBuffer[6]  << 8) + ((ULONG)UART_ubReadBuffer[7] );
                    temp_ulAddr[2] = 0x20000000 + ((ULONG)UART_ubReadBuffer[8]  << 16) + ((ULONG)UART_ubReadBuffer[9]  << 8) + ((ULONG)UART_ubReadBuffer[10]);
                    temp_ulAddr[3] = 0x20000000 + ((ULONG)UART_ubReadBuffer[11] << 16) + ((ULONG)UART_ubReadBuffer[12] << 8) + ((ULONG)UART_ubReadBuffer[13]);
                    temp_ulAddr[4] = 0x20000000 + ((ULONG)UART_ubReadBuffer[14] << 16) + ((ULONG)UART_ubReadBuffer[15] << 8) + ((ULONG)UART_ubReadBuffer[16]);
                    temp_ulAddr[5] = 0x20000000 + ((ULONG)UART_ubReadBuffer[17] << 16) + ((ULONG)UART_ubReadBuffer[18] << 8) + ((ULONG)UART_ubReadBuffer[19]);           
                    /* handle address */
                    for(i=0; i<CHANNEL_NUM; i++)// *Application Specific*
                    {
                        if(temp_ulAddr[i] >= 0x20000000 && temp_ulAddr[i] <= HW_RAM_END_ADDRESS) // STM32F03x SRAM range                
                        {  
                            UART_pMonAddr[i] = (unsigned short *)(temp_ulAddr[i]&0xfffffffe);   
                        }					  
                    }       			
                }
                else
                {
                    UART_uwWriteIndex = 4;	// restore initial WriterBufferIndex 
                }	
                return;
            }		          		
            //++++++++++++++++++++ decode R/W Parameter command ++++++++++++++++++++++++
            if((UART_ubReadBuffer[0]==0x11)&&(UART_ubReadBuffer[1]==0x10))
            {
                uart_voHandleParaCmd();
                return;		
            }			
            //++++++++++++++++++++ decode drying machine command ++++++++++++++++++++++++
            if((UART_ubReadBuffer[0]==0x02)&&(UART_ubReadBuffer[1]==0x01))
            {
                if(UART_ubReadBuffer[2] == 0x11)	// query command
                {                    
                    twmp_stMesg.enType = UART_SEND_STATUS;
                    twmp_stMesg.pBuf = NULL;
                    twmp_stMesg.uwNumBytes =0;
                    uart_voPostMsg(twmp_stMesg);
                }                 
                return;
            }		    				
        }				
    }	
}
/*************************************************************** 
 Function
 Description: callback called when error occurs
 Call by: ;
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
void CBError_monitor(UART_ERR_Type _err)
{
    // switch (_err)
    // {
    //     case UART_ERR_TIMEOUT:
    //         DMA1_Channel3->CCR &= (uint16_t)(~DMA_CCR_EN);
    //         DMA1->IFCR = DMA_ISR_GIF3;
    //         DMA1_Channel3->CNDTR = 22;
    //         DMA1_Channel3->CCR |= DMA_CCR_EN;
    //         break;
    //     case UART_ERR_NO_BUFFER:
    //         break;
    //     default:
    //         break;
    // }
}
/*************************************************************** 
 Function
 Description: Callback called when some data received.
 Call by: ;
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
void uart_voCBDoneRead(UART_ERR_Type _err, ULONG _NumBytes)
{
    switch(_err)
    {
        case UART_ERR_OK:
            UART_uwRxNum = _NumBytes;	// copy received data number
            break; 		 	
        case UART_ERR_TIMEOUT:
            break; 			
        default:  			         
            break;
    }
}
/*************************************************************** 
 Function
 Description: used to send monitor data out
 Call by: tbc_voIsr();
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
void uart_voAppMonitor(void)
{
//    if(UART_bMonSwitch) 
//    {    
//        UBYTE temp_ubBuf[TEMP_BUFFER_LEN];
//        UBYTE i;	     
//    //------ load monitor channels data (general) --------//   
//        for(i=0;i<(TEMP_BUFFER_LEN>>1);i++)	 // less than half of TEMP_BUFFER_LEN
//        {
//            temp_ubBuf[i*2]   = (*UART_pMonAddr[i])>>8;	    //Data.hi
//            temp_ubBuf[i*2+1] = (*UART_pMonAddr[i])&0xff;	//Data.lo	
//        }    
//    //------ loading data from tempBuffer to Writebuffer and send out when Writebuffer is full -------//    
//        for(i = 0; i < TEMP_BUFFER_LEN; i++)
//        {
//            UART_pWriteBuffer[UART_uwWriteIndex] = temp_ubBuf[i];	// write latest data//data adrress      
//            if(UART_uwWriteIndex == (S_FRAME_SIZE-1))	//if full, start Write_Async
//            {
//                if(!UART_stParaStatus.bWriteBusy)
//                {                 
//                    UART_stParaStatus.bWriteBusy = TRUE;                                    
//                    if((UART_bInsertPendTx==TRUE)&&(UART_pWriteBuffer == UART_ubWriteBuffer2))	// send writeBuffer and insertBuffer
//                    {                                             
//                        UART_stParaStatus.bParaStart = TRUE; 
//                        iUart_WriteAsync(0, UART_pWriteBuffer, S_FRAME_SIZE+16, uart_TxCompleteCallback, uart_TxErrorCallback);
//                    }
//                    else
//                    {                     
//                        UART_stParaStatus.bParaStart = FALSE; 
//                        iUart_WriteAsync(0, UART_pWriteBuffer, S_FRAME_SIZE, uart_TxCompleteCallback, uart_TxErrorCallback);
//                    }             
//                    if(UART_pWriteBuffer == UART_ubWriteBuffer1) 
//                    {
//                        UART_pWriteBuffer = UART_ubWriteBuffer2;               
//                    }	//dual buffer swap.
//                    else 
//                    {                             
//                        UART_pWriteBuffer = UART_ubWriteBuffer1;
//                    }                                        
//                    //initialize UART_uwWriteIndex
//                    UART_uwWriteIndex = 4;  // utilize later 60bytes of 64bytes of write-frame               
//                }
//                else
//                {
//                    UART_uwWriteIndex = 4; 
//                }           		         			
//            }
//            else 
//            {
//                UART_uwWriteIndex++;    
//            }  //index increase to next write position          
//        }        
//    }
}
/*************************************************************** 
 Function
 Description: post message
 Call by: main;
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
void uart_voPostMsg(UART_MSG _msg)
{
    if((UART_stMsgQ.pSave == UART_stMsgQ.pUse)&&(UART_stMsgQ.bValid == TRUE))
    {
        return;// if UART_stMsgQueue is full, just return  
    }   
    UART_stMsgQ.pSave->stMsg = _msg;
    UART_stMsgQ.pSave = UART_stMsgQ.pSave->pNext;    
    UART_stMsgQ.bValid = TRUE;  
}
/*************************************************************** 
 Function
 Description: handle parameter related command
 Call by: UART_voDecode;
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
void uart_voHandleParaCmd(void)
{
    UWORD i;
    UWORD temp_uwIndex;
    UWORD temp_HiWord,temp_LowWord;    
    UART_MSG temp_stMsg;   
    if(UART_ubReadBuffer[2] == 0x01)  // Read parameters command
    {		
        for(i=2;i<PARA_TABLE_SIZE;i+=2)
        {
            //----- check 16bits data's sign ------
            if(i>=14)
            {
                if(*UART_pParaTable[i+1]&0x8000)
                {
                    *UART_pParaTable[i] = 0xFFFF;
                }	// if data16<0
                else 
                {
                    *UART_pParaTable[i] = 0x0000;
                }
            }
            // ----- load value (little-endian)-----
            UART_ubParaBuffer[i*2-4] = (UBYTE)((*UART_pParaTable[i])>>8);    
            UART_ubParaBuffer[i*2-3] = (UBYTE)((*UART_pParaTable[i])&0x00FF);  
            UART_ubParaBuffer[i*2-2] = (UBYTE)((*UART_pParaTable[i+1])>>8);   
            UART_ubParaBuffer[i*2-1] = (UBYTE)((*UART_pParaTable[i+1])&0x00FF); 
        }		
        temp_stMsg.enType = UART_SEND_PARA;
        temp_stMsg.pBuf = UART_ubParaBuffer;
        temp_stMsg.uwNumBytes = PARA_BUFFER_SIZE ;
        uart_voPostMsg(temp_stMsg);        // post message
    }
    if(UART_ubReadBuffer[2] == 0x02)  // Write Parameters command
    {
        temp_uwIndex = UART_ubReadBuffer[3];
        temp_HiWord = ((UWORD)UART_ubReadBuffer[4]<<8) + ((UWORD)UART_ubReadBuffer[5]);
        temp_LowWord = ((UWORD)UART_ubReadBuffer[6]<<8) +((UWORD)UART_ubReadBuffer[7]);
        *UART_pParaTable[temp_uwIndex] = temp_HiWord;
        *UART_pParaTable[temp_uwIndex+1] = temp_LowWord;
    }
}
/*************************************************************** 
 Function
 Description: Query if there is a message in msgQueue
 Call by: SysTick_Handler;
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
void uart_voApplTimer(void)
{
//    UBYTE i = 0;
//    if(UART_stMsgQ.bValid)       // if there is a message in msgQueue
//    {  
//    //------------- fetch message ---------------//
//        if(UART_stMsgQ.bHandling == FALSE) // if there isn't any MSG under handling.
//        {
//            if(UART_stMsgQ.pUse != UART_stMsgQ.pSave)
//            {
//                UART_stMsgFetched = UART_stMsgQ.pUse->stMsg;// fetch message
//                UART_stMsgQ.pUse = UART_stMsgQ.pUse->pNext;	// shift to next UART_stMsgQueue position            
//                UART_stMsgQ.bHandling = TRUE; 	        //set bMsgHandling flag, prevent from fetching new msg from UART_stMsgQueue.
//            }
//            else
//            {
//                UART_stMsgQ.bValid = FALSE;		// invalid UART_stMsgQueue(all message has been handled, prevent from calling UART_voHandleMsg again)
//                return;
//            }		
//        }
//    //--------------------------------------------   
//        if(UART_bInsertPendTx)
//        {
//            return;// if insertBuffer is pending to be transmitted, just return to wait
//        }       
//        //------------  process message --------------//
//        switch(UART_stMsgFetched.enType)				
//        {			
//            case UART_NULL:		        // invalid message
//                break;		
//            case UART_SEND_PARA:	        
//            {		
//                if((UART_stMsgFetched.uwNumBytes==0)||(UART_stMsgFetched.pBuf==NULL))
//                { 
//                    UART_stMsgQ.bHandling = FALSE;	// fetched message has been processed over(invalid message)
//                    return; 
//                }          
//                UART_ubInsertBuf[4] = 0x11;	// parameter response frame header	
//                UART_ubInsertBuf[5] = 0x10;
//            }
//                break;
//            case UART_SEND_STATUS:
//            {	
//                if((UART_stMsgFetched.uwNumBytes==0)||(UART_stMsgFetched.pBuf==NULL))
//                { 
//                    UART_stMsgQ.bHandling = FALSE;	// fetched message has been processed over(invalid message)
//                    return; 
//                }        
//                UART_ubInsertBuf[4]=0x02;	// application status response header	
//                UART_ubInsertBuf[5]=0x01;
//            }	
//                break;			
//        }	     
//        if(UART_stMsgFetched.uwNumBytes  > (INSERT_BUFFER_SIZE-INSERT_BUFFER_HEADER_LEN))	
//        {					
//            UART_ubInsertBuf[INSERT_BUFFER_HEADER_LEN-1] = 0xFF;	
//            UART_stMsgFetched.uwNumBytes -= (INSERT_BUFFER_SIZE-INSERT_BUFFER_HEADER_LEN);// bytes left to be sent out in modbus response.			
//            for(i=0;i<(INSERT_BUFFER_SIZE-INSERT_BUFFER_HEADER_LEN);i++)
//            {
//                UART_ubInsertBuf[INSERT_BUFFER_HEADER_LEN+i] = *UART_stMsgFetched.pBuf;
//                UART_stMsgFetched.pBuf++; 
//            }      
//        }
//        else
//        {
//            UART_ubInsertBuf[INSERT_BUFFER_HEADER_LEN-1] = UART_stMsgFetched.uwNumBytes;				
//            for(i=0;i<UART_stMsgFetched.uwNumBytes;i++)
//            {
//                UART_ubInsertBuf[INSERT_BUFFER_HEADER_LEN+i] = *UART_stMsgFetched.pBuf;
//                UART_stMsgFetched.pBuf++; 
//            }               
//            UART_stMsgQ.bHandling = FALSE;// fetched message has been processed over(new message can be fetched)
//        }   
//        UART_bInsertPendTx = TRUE;        // insertBuffer is pending to be transmitted     
//        //----------- transmit message -------------//
//        if(UART_bMonSwitch)//--- Load data in insertBuffer to WriteBuffer2 ---	 
//        {     
//            for(i=0;i<INSERT_BUFFER_SIZE;i++)
//            {          
//                UART_ubWriteBuffer2[S_FRAME_SIZE+i] = UART_ubInsertBuf[i];
//            }                     
//        } 
//        else
//        {
//            UART_stParaStatus.bParaStart = TRUE;
//            iUart_WriteAsync(0, UART_ubInsertBuf, 16, uart_TxCompleteCallback, uart_TxErrorCallback);
//        }        
//    }
}
/*************************************************************** 
 Function
 Description: XOR check when receive data.
 Call by: main;
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
UBYTE uart_ubCheckXOR(UBYTE* Buf, UBYTE CNT)
{
    UWORD temp_Xor = 0;
    UWORD i;
    for(i=0;i<CNT; i++)
    {
        temp_Xor ^= Buf[i];
    }
    return temp_Xor; 
}
/*************************************************************** 
 Function
 Description: Reconfigure when the data received incomletely in 1s
 Call by: SysTick_Handler;
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
void uart_voDriTimer(void)
{
    // if(DMA1_Channel3->CNDTR != 22)
    // {
    //     ++UART_uwTimeoutCtr;
    //     if(UART_uwTimeoutCtr == UART_Config.uwTimeout)	// Timeout match
    //     {
    //         UART_uwTimeoutCtr = 0;
    //         UART_fpError(UART_ERR_TIMEOUT);
    //     }
    // }
    // else
    // {
    //     UART_uwTimeoutCtr = 0;
    // }
}
/***************************************************************  
 Function: 
 Description: 
 Call by: 
 Input Variables: 
 Output/Return Variables: 
 Subroutine Call: 
 Reference: N/A
****************************************************************/
void uart_Read_Poll2(ULONG _NumBytes,UBYTE* _Buffer,CB_DONE_READ _fpCBDone)
{
	UBYTE i;
	UBYTE* pBuffer = _Buffer;
	//---clear receive data buffer!---
	for(i=0;i<_NumBytes;i++)
	{
		*pBuffer = 0;
		pBuffer++;
	}		
	//---Set busy flag---
	USART_Read.m_ReadBusy = TRUE;		// clear ReadBusy flag		
	//---setup Read object---	
	USART_Read.m_BuffSize = _NumBytes;	
	USART_Read.m_DataBuff.pBuf = _Buffer;
	USART_Read.m_fpDone = _fpCBDone;
	USART_Read.m_DataBuff.NumBytes = 0;	
} 
/***************************************************************  
 Function: 
 Description: 
 Call by: 
 Input Variables: 
 Output/Return Variables: 
 Subroutine Call: 
 Reference: N/A
****************************************************************/
void ReadFrame_Poll2(void)
{
//    UBYTE tempRxData;
//    CB_DONE_READ CBTemp;
//	if(NULL == USART_Read.m_DataBuff.pBuf)
//    {
//        return;
//    }
//    while (iUart_Available(0))
//    {	
//        iUart_Read(0, &tempRxData, 1);		// save register data
//        UART_blCommErrFlag = FALSE;
//        if(uart_frameStartFlag == FALSE)		// if the frame header has not been detected.
//        {
//            if(tempRxData != 0x11)
//            {
//                return;
//            }	// 0xB2 is LittleSwan CMD frame header byte.
//            else // frame header detected
//            {							
//                if(USART_Read.m_DataBuff.NumBytes==0)	// ready to save data
//                {
//                    uart_frameStartFlag = TRUE;
//                    uart_receivedNum = 0;
//                }
//                else	// not ready to save data 
//                {
//                    return;	// just return (wait until ready)
//                }
//            }
//        }
//        //------------------------ cmd frameheader 0xB2 has been detected -----------------------
//        uart_receivedNum++;
//        uart_frameLength = 22;	
//        if(uart_receivedNum == uart_frameLength)
//        {
//            uart_receivedNum =0;
//            uart_frameStartFlag = FALSE;
//        }
//        if(UART_blCommErrFlag == FALSE)	
//        {
//            if(USART_Read.m_BuffSize > USART_Read.m_DataBuff.NumBytes) 
//            {
//                if(USART_Read.m_DataBuff.pBuf != NULL)
//                {
//                    *USART_Read.m_DataBuff.pBuf =  tempRxData;
//                    USART_Read.m_DataBuff.pBuf++;
//                    USART_Read.m_DataBuff.NumBytes++;
//                }  		 
//                if(USART_Read.m_DataBuff.NumBytes  == uart_frameLength)
//                {                       
//                    USART_Read.m_DataBuff.pBuf = NULL;	
//                    USART_Read.m_BuffSize = 0;
//                    CBTemp = USART_Read.m_fpDone;
//                    USART_Read.m_fpDone = NULL;                          
//                    USART_Read.m_ReadBusy = FALSE;		// clear ReadBusy flag !      
//                    if(CBTemp != NULL)
//                    {	
//                        CBTemp(UART_ERR_OK, uart_frameLength);
//                    }
//                    uart_frameLength = 0;
//                }	 
//            }
//        }
//    }
}

/*************************************************************** 
 Function:
 Description: 
 Call by: main;
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
void uart_voSwanInit(void)
{   	
    UART_fpError = (CB_ERROR)CBError_Swan;    	           
    UART_Config = UART_stConfigLEN;           	           
    uart_Read_Poll2(RX_BUFFER_SIZE,uart_pReadBuffer2,CBDoneRead2);	// use poll method for littleswan receiving.
}
/*************************************************************** 
 Function
 Description: 
 Call by: main;
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
void CBError_Swan(UART_ERR_Type _err)
{
  switch (_err)
  {
    case UART_ERR_TIMEOUT:
        uart_DataNum2 = 0;		// clear s_DataNum2 for the next read !!
        uart_Read_Poll2(RX_BUFFER_SIZE,uart_pReadBuffer2,CBDoneRead2);
      break;
    case UART_ERR_NO_BUFFER:
      break;
    case UART_ERR_UNKNOWN_CMD:
        uart_DataNum2 = 0;		// clear s_DataNum2 for the next read !!
        uart_Read_Poll2(RX_BUFFER_SIZE,uart_pReadBuffer2,CBDoneRead2);
      break;
    case UART_ERR_OK:

      break;
  }
}
/***************************************************************  
 Function: 
 Description: 
 Call by: 
 Input Variables: 
 Output/Return Variables: 
 Subroutine Call: 
 Reference: N/A
****************************************************************/
//void WriteFrame_Poll2(void)
//{   
//    BOOL WriteOverFlag = FALSE;
//    if(NULL== USART_Write.m_DataBuff.pBuf)
//    {
//        return;
//    }    	
//	if(USART_Write.m_DataBuff.NumBytes != 0)
//	{
//        USART1->TDR = *USART_Write.m_DataBuff.pBuf;
//		USART_Write.m_DataBuff.pBuf++;
//		USART_Write.m_DataBuff.NumBytes--;
//    	if(0 == USART_Write.m_DataBuff.NumBytes)
//        {
//    		WriteOverFlag = TRUE;                    				
//        }
//	}
//	if(TRUE == WriteOverFlag)
//	{
//        //disable TXEIE(bit7)
//        USART1->CR1 &= ~0x00000080;     
//		WriteOverFlag = FALSE;
//		USART_Write.m_DataBuff.pBuf =NULL;
//		USART_Write.m_WriteBusy = FALSE;	
//	}
//}
/***************************************************************  
 Function: 
 Description: 
 Call by: 
 Input Variables: 
 Output/Return Variables: 
 Subroutine Call: 
 Reference: N/A
****************************************************************/
void HAL_CancelRead_Poll2(void)
{
	USART_Read.m_BuffSize = 0;	
	uart_receivedNum =0;
	uart_frameLength =0;
	uart_frameType = 0x00;
	uart_frameStartFlag = FALSE;
    UART_fpError(UART_ERR_TIMEOUT);
}
/*************************************************************** 
 Function
 Description: 
 Call by: main;
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
// void uart_voApplMain(void)
// {
// 	UBYTE* pBuffer = NULL;		
// 	UWORD numBytes = 0;		   
// 	if(uart_DataNum2)	
//     {	           
//         if(SwanDecoder(uart_pReadBuffer2, uart_DataNum2, &pBuffer, &numBytes))
//         {
//             uart_Write_Poll2(numBytes, pBuffer);
//         }         
//         uart_DataNum2 = 0;		
//         uart_Read_Poll2(RX_BUFFER_SIZE,uart_pReadBuffer2,CBDoneRead2);
// 	} 
// }
/***************************************************************  
 Function: 
 Description: 
 Call by: 
 Input Variables: 
 Output/Return Variables: 
 Subroutine Call: 
 Reference: N/A
****************************************************************/
// void uart_Write_Poll2(ULONG _NumBytes,const UBYTE* _Buffer)
// {
// 	if(USART_Write.m_WriteBusy == TRUE)
// 	{
// 		return;
// 	}
// 	USART_Write.m_WriteBusy = TRUE;
// 	USART_Write.m_DataBuff.pBuf = (UBYTE*)_Buffer;
// 	USART_Write.m_DataBuff.NumBytes = _NumBytes;    
//     //enable TXEIE(bit7)
//     USART1->CR1 |= 0x00000080;
// }

void uart_TxCompleteCallback()
{
    if( UART_stParaStatus.bParaStart)
    {         
        UART_bInsertPendTx = FALSE;  // clear insertBuffer pending
        UART_stParaStatus.bParaStart = FALSE; //clear parameter status                          
    }
    else
    {
        //do nothing   
    }
    UART_stParaStatus.bWriteBusy = FALSE;    
}

void uart_TxErrorCallback()
{
    if( UART_stParaStatus.bParaStart)
    {         
        UART_bInsertPendTx = FALSE;  // clear insertBuffer pending
        UART_stParaStatus.bParaStart = FALSE; //clear parameter status       
    }
    UART_stParaStatus.bWriteBusy = FALSE;
}

/***************************************************************
 Function: ;crc_ccitt(polynomial:1021)
 Description:
 Call by:
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: ...;
 Reference: N/A
****************************************************************/
#ifdef CRC_CCITT
UWORD uart_uwCRCCcitt(UBYTE *ptubBuf, UWORD length)
{
    UBYTE b = 0;
    UWORD crc = 0xffff;
    UWORD i, j;
    for (i = 0; i < length; i++)
    {
        for (j = 0; j < 8; j++)
        {
            b = ((ptubBuf[i] << j) & 0x80) ^ ((crc & 0x8000) >> 8);
            crc <<= 1;
            if (b != 0)
            {
                crc ^= 0x1021;
            }
        }
    }
    return crc;
}
#endif
/************************************************************************
  Local Functions:
*************************************************************************/

#ifdef _UART_MONITOR_C_
    #undef _UART_MONITOR_C_
#endif
/************************************************************************
 Copyright (c) 2019 Welling Motor Technology(Shanghai) Co. Ltd.
 All rights reserved.
*************************************************************************
 End of this File (EOF)!
 Do not put anything after this part!
*************************************************************************/