motor_ctl-1/3.BasicFunction/Source/uart_lanfeng.c

/**
  ******************************************************************************
  * @file    uart_lanfeng.c
  * @author  
  * @version V1.0.0
  * @date    23-12-2015
  * @brief  uart_lanfeng function.
  ******************************************************************************
  *
  * COPYRIGHT(c) 2015 STMicroelectronics
  *
  * Redistribution and use in source and binary forms, with or without modification,
  * are permitted provided that the following conditions are met:
  *   1. Redistributions of source code must retain the above copyright notice,
  *      this list of conditions and the following disclaimer.
  *   2. Redistributions in binary form must reproduce the above copyright notice,
  *      this list of conditions and the following disclaimer in the documentation
  *      and/or other materials provided with the distribution.
  *   3. Neither the name of STMicroelectronics nor the names of its contributors
  *      may be used to endorse or promote products derived from this software
  *      without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  ******************************************************************************
  */
/* Includes ------------------------------------------------------------------*/
#include "uart_lanfeng.h"
#include "string.h"
#include "usart.h"
#include "canAppl.h"
#include "syspar.h"
#include "bikebrake.h"
#include "bikethrottle.h"

/******************************
 *
 *  Parameter
 *
 ******************************/
Lanfeng_OBC2MCInfo_Struct_t Lanfeng_stOBC2MCInfo;

/******************************
 *
 *  Functions
 *
 ******************************/
/***************************************************************
 Function: 
 Description: OBC set MC parameter(轮径 电流阈值/功率阈值 限速值)
 Call by: 
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: N/A;
 Reference: N/A
****************************************************************/
void Lanfeng_OBCSetPara(LanfengOBC_SetInfo_Struct_t obc_setinfo)
{
    UWORD SpeedLimitation = 0;
    UWORD WheelPerimeter = 0;
    /*参数设定*/
    
    /*限速阈值更新*/
    SpeedLimitation = (UWORD)(obc_setinfo.Set_Bit.ucSpeedLimitation + 12);
    if(MC_UpcInfo.stAssistInfo.uwAssistLimitBikeSpdStart != SpeedLimitation)
    {
        MC_UpcInfo.stAssistInfo.uwAssistLimitBikeSpdStart = SpeedLimitation;
        MC_UpcInfo.stAssistInfo.uwAssistLimitBikeSpdStop = SpeedLimitation + 2;
        MC_UpcInfo.stBikeInfo.uwThrottleMaxSpdKmH = SpeedLimitation;
        MC_UpcInfo.stBikeInfo.uwSaveFlg = 1;
        MC_UpcInfo.stAssistInfo.uwSaveFlg = 1;
        cp_stFlg.ParaSaveEEFlg = TRUE;
        cp_stFlg.ParaUpdateFlg = TRUE;
        cp_stFlg.ParaAInfoUpdateFlg = TRUE;
        cp_stFlg.ParaBikeInfoUpdateFlg = TRUE;
        cp_stFlg.ParaAssistUpdateFinishFlg = TRUE;
    }
    
    /*轮径*/
    /*轮径更新*/
    if(obc_setinfo.Set_Bit.ucWheelDiameterCode <= 5)
    {
        WheelPerimeter = (obc_setinfo.Set_Bit.ucWheelDiameterCode*2 + 16) * 8;    //3.14*2.54=7.9756=8
    }
    else if(obc_setinfo.Set_Bit.ucWheelDiameterCode == 6)
    {
        WheelPerimeter = 219;    //3.14*700mm=2198mm
    }
    else
    {
        WheelPerimeter = 223;    //3.14*2.54*28
    }
    if(MC_UpcInfo.stBikeInfo.uwWheelPerimeter != WheelPerimeter)
    {
        MC_UpcInfo.stBikeInfo.uwWheelPerimeter = WheelPerimeter;
        MC_UpcInfo.stBikeInfo.uwSaveFlg = 1;
        cp_stFlg.ParaSaveEEFlg = TRUE;
        cp_stFlg.ParaUpdateFlg = TRUE;
        cp_stFlg.ParaBikeInfoUpdateFlg = TRUE;
        cp_stFlg.ParaAssistUpdateFinishFlg = TRUE;
    }
}
/***************************************************************
 Function: ;
 Description: Get OBC GearSt and LightControl information
 Call by: 
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: N/A;
 Reference: N/A
****************************************************************/
void Lanfeng_USART_DataProcess(USART_Buf_TypeDef* ptUartTx, UBYTE Cmd, UBYTE* Data)
{
    if(Cmd == 0x2C)
    {
        /*数据获取*/
        memcpy(&Lanfeng_stOBC2MCInfo.stCtrlInfo1, &Data[2], 1);
        memcpy(&Lanfeng_stOBC2MCInfo.stCtrlInfo2, &Data[3], 1);
        memcpy(&Lanfeng_stOBC2MCInfo.stSetInfo, &Data[4], 1);
        
        /*数据更新*/
        if(Lanfeng_stOBC2MCInfo.stCtrlInfo2.Ctrl_Bit.Walk == 1)
        {
            MC_ControlCode.GearSt = MC_GearSt_WALK;
        }
        else if(Lanfeng_stOBC2MCInfo.stCtrlInfo2.Ctrl_Bit.ucGearSt == 5)
        {
            MC_ControlCode.GearSt = MC_GearSt_SMART;
        }
        else if(Lanfeng_stOBC2MCInfo.stCtrlInfo2.Ctrl_Bit.ucGearSt == 4)               
        {
            MC_ControlCode.GearSt = MC_GearSt_Torque_TURBO;
        }
        else if(Lanfeng_stOBC2MCInfo.stCtrlInfo2.Ctrl_Bit.ucGearSt == 3)
        {
            MC_ControlCode.GearSt = MC_GearSt_Torque_SPORT;
        }
        else if(Lanfeng_stOBC2MCInfo.stCtrlInfo2.Ctrl_Bit.ucGearSt == 2)
        {
            MC_ControlCode.GearSt = MC_GearSt_Torque_NORM;
        }
        else if(Lanfeng_stOBC2MCInfo.stCtrlInfo2.Ctrl_Bit.ucGearSt == 1)
        {
            MC_ControlCode.GearSt = MC_GearSt_Torque_ECO;
        }  
        else
        {
            MC_ControlCode.GearSt = MC_GearSt_OFF;
        }
        
        if(Lanfeng_stOBC2MCInfo.stCtrlInfo2.Ctrl_Bit.Light == 1)                           //大灯
        {
            MC_ControlCode.LightSwitch = MC_LightSwitch_ON;
        }
        else
        {
            MC_ControlCode.LightSwitch = MC_LightSwitch_OFF;
        }
        
        MC_RunInfo.GearSt = MC_ControlCode.GearSt;           //当前助力档位更新
        MC_RunInfo.LightSwitch = MC_ControlCode.LightSwitch; //大灯状态更新
        ulOBC_ComTimeOutCount = cp_ulSystickCnt;
        
        //Lanfeng_OBCSetPara(Lanfeng_stOBC2MCInfo.stSetInfo);//参数更新
        
        Lanfeng_SendData_OBC(ptUartTx,Cmd);
    }
    else if(Cmd == 0x2D)        //读取控制器版本
    {
        if((Data[2] == 0x56) && (Data[3] == 0x45) && (Data[4] == 0x52))
        {
            Lanfeng_SendData_OBC(ptUartTx,Cmd);
        }
    }
}
/***************************************************************
 Function: 
 Description: Send Data to OBC
 Call by: 
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: N/A;
 Reference: N/A
****************************************************************/
void Lanfeng_SendData_OBC(USART_Buf_TypeDef* ptUartTx, UBYTE Cmd)
{
    UBYTE i = 0;
    UBYTE databuf[10] = {0};
    UWORD checksum = 0;
    UBYTE datalen = 10;
    UWORD Speed = 0;
    UBYTE Current = 0;
    
    /*数据发送*/
    databuf[0] = 0x3A;
    databuf[1] = Cmd;
    if(Cmd == 0x2C)
    {
        Current = (UBYTE)(abs(MC_RunInfo.BusCurrent/1000)*3);//电流
        
        if(bikespeed_stFreGetOut.uwLPFFrequencyPu == 0)
        {
            Speed = 0;
        }
        else
        {
            Speed = (UWORD)((SQWORD)(1000 << 20) / bikespeed_stFreGetOut.uwLPFFrequencyPu / FBASE); //车轮转动一圈时间，ms
        }
        databuf[2] = Current;
        databuf[3] = (UBYTE)(Speed & 0xFF);
        databuf[4] = (UBYTE)((Speed & 0xFF00)>>8);
        if(curSpeed_state.state == ClzLoop)
        {
            databuf[5] = 0x10;
        }
        else
        {
            databuf[5] = 0x00;
        }
        
        if(1 == MC_ErrorCode.ERROR_Bit.Protect_OverCurrent)
        {
            databuf[5] |= 0x01;//电流异常
        }
        else if(1 == MC_ErrorCode.ERROR_Bit.Fault_Throttle)
        {
            databuf[5] |= 0x02;//转把异常
        }
        else if(1 == MC_ErrorCode.ERROR_Bit.Fault_PhaseLine)
        {
            databuf[5] |= 0x03;//电机缺相
        }
        else if(1 == MC_ErrorCode.ERROR_Bit.Fault_HallSensor)
        {
            databuf[5] |= 0x04;//电机霍尔异常
        }
        /*else if(0)
        {
            databuf[5] |= 0x05;//刹车异常
        }*/
        else if(1 == MC_ErrorCode.ERROR_Bit.Protect_UnderVoltage)
        {
            databuf[5] |= 0x06;//欠压
        }
        else if(1 == MC_ErrorCode.ERROR_Bit.Protect_LockRotor)
        {
            databuf[5] |= 0x07;//电机堵转
        }
        /*else if(0)
        {
            databuf[5] |= 0x08;//通讯故障
        }*/
    }
    else if(Cmd == 0x2D)
    {
        databuf[2] = MC_VerInfo.FW_Version[1] - 48;
        databuf[3] = MC_VerInfo.FW_Version[3] - 48;
        databuf[4] = MC_VerInfo.FW_Version[5] - 48;
        databuf[5] = 0;
    }
 
    for(i=1; i<(datalen-4); i++)
    {
        checksum = (UWORD)(databuf[i] + checksum);
    }
    
    databuf[datalen-4] = (UBYTE)(checksum & 0xFF);
    databuf[datalen-3] = (UBYTE)(checksum >> 8);  
    databuf[datalen-2] = 0x0D;
    databuf[datalen-1] = 0x0A;
    
    for(i=0; i<datalen; i++)
    {
        UART_PutChar(ptUartTx, databuf[i]);
    }
}
/***************************************************************
 Function: 
 Description: Get Uart Data following the protocol
 Call by: 
 Input Variables: N/A
 Output/Return Variables: N/A
 Subroutine Call: N/A;
 Reference: N/A
****************************************************************/
void Lanfeng_USART_RxData_Process(USART_Buf_TypeDef* ptUartTx, UBYTE* buf, UWORD dataCount)
{
    UBYTE Cmd;
    static UBYTE Data[255];
    UWORD i;
    UWORD CheckSumResult=0, CheckSumData=0;
    UBYTE FrameBegin, FrameEnd1, FrameEnd2;
	
    if(dataCount == 9)
    {
        //帧头
        FrameBegin = buf[0];
        if(FrameBegin == 0x3A)
        {
            //命令字
            Cmd = buf[1];
            if((Cmd == 0x2C) || (Cmd == 0x2D))  //命令字
            {
                for(i=0; i<dataCount; i++)//数据
                {
                    Data[i] = buf[i];
                }
                CheckSumData = (UWORD)(Data[dataCount-4] + (Data[dataCount-3] << 8));
                for(i = 1; i<(dataCount-4); i++)
                {
                    CheckSumResult = (UWORD)(Data[i] + CheckSumResult);
                }
                
                FrameEnd1 = Data[dataCount-2];
                FrameEnd2 = Data[dataCount-1];
                        
                if((CheckSumData == CheckSumResult) && (FrameEnd1 == 0x0D) && (FrameEnd2 == 0x0A))// 校验和帧尾正常
                {                          
                    Lanfeng_USART_DataProcess(ptUartTx, Cmd, &Data[0]);
                }
            }
        }
    }
}

/************************ (C) END OF FILE *********************************/